| |
A special concrete mix is used for
all stamping jobs. |
| |
All concrete is rated at 4,500 pounds per square
inch. |
| |
Fiber mesh in included in all pours for increased
strength. |
| |
Base preparation is 4 inches of compacted Class
5 limestone,
sand, or other appropriate base materials. |
| |
Wood and plastic forms are used to allow for
curves in the design. |
| |
#2 rebar is placed in the bottom two inches of
the pour
and set every three feet on center. |
| |
All concrete is poured at 4 inches or thicker. |
| |
All forms are removed within 2 days of the pour
being finished. |
| |
Expansion cuts will be cut in all concrete and
will be at
least 1/4 of the thickness of the pour. |
| |
All stamped pours will be sealed with a quality,
ultraviolet resistant and slip-resistant sealer. |
| |
Any crack that occurs during the first year that
is more than
1/8 of an inch wide is considered a warranty item and will be
repaired. |
